A spray water chamber of the SPK series is operated via a 15″ touch panel. The operating software can be operated intuitively.
The software includes the following core functions:

• Manual operation to set up the test items
• Automatic testing with defined test programs
• Data recording of values ​​such as pressure, temperature, flow rate
• Creation of your own test programs

This option allows you to perform the IPX1/2 tests

(dripping water)

The following drip devices can be integrated into the spray water chambers of the SPK series:

• TG43 – drainer 400 x
• 300mm • TG64 – drainer 600 x
• 400mm • TG55 – drainer 500 x 500mm

The standard scope of delivery of a spray water chamber of the SPK series includes the turntable in the middle of the chamber as well as the equipment to carry out an IPX3/4 test.

A swivel elbow with a maximum radius of 200 mm can be used in an SPK R200. In an SPK R800, the maximum radius is 800 mm. Of course, smaller bows can also be installed in larger cabins.

All swivel bends are equipped with nozzles with a diameter of 0.4 mm.

This option allows performing the IPX4K tests

(spray water with increased pressure)

To meet ISO20653 and other automotive standards, the swing elbows are fitted with 0.8mm nozzles and operated at 4-5 bar.

This option allows performing the IPX5/6 tests

(jet water test)

In order to achieve the distance of 2.5 -3m between test object and test nozzle required in all standards, an extension tunnel is connected to the chamber in which the nozzles are located.

This option allows performing the IPX6K tests

(jet water with increased pressure)

To meet ISO20653 and other automotive standards, the jet nozzle with a diameter of 6.3 mm is operated at a pressure of 10-12 bar and 75 l/min.

This option allows performing the IPX9/9K tests

(protection against high pressure)

For this purpose, a lance frame is mounted in the chamber, with nozzles in 0/30/30 and 90° positions.

The associated water supply supplies an adjustable water pressure of 20 – 120 bar with a maximum of 16l/min and a water temperature of 20-85°C

The nozzles can be measured according to DIN EN 60529.

The option enables tests according to the Japanese JIS standard.
With the additional drive and the two special nozzles, you can carry out the tests S1/S2 and R1/R2 in accordance with the JIS D 0203 standard.

Outside dimensions (width / length / height) in mm:  1400 / 1100 / 2110

Test room dimensions (width / length / height) in mm:  1050 / 1050 / 1050

Arc radius (maximum) in mm:  200

Size of the turntable in mm:  300

Swivel tube swivel angle:  +/- 175°

Turntable revolutions:  1-5 rpm

Outside dimensions (width / length / height) in mm:  1600 / 1200 / 2110

Test room dimensions (width / length / height) in mm:  1150 / 1150 / 1500

Arc radius (maximum) in mm:  400

Size of the turntable in mm:  300

Swivel tube swivel angle:  +/- 175°

Turntable revolutions:  1-5 rpm

External dimensions (width / length / height) in mm:  1970 / 1700 / 2110

Test room dimensions (width / length / height) in mm:  1450 / 1450 / 1500

Arc radius (maximum) in mm:  600

Size of the turntable in mm:  300

Swivel tube swivel angle:  +/- 175°

Turntable revolutions:  1-5 rpm

Outside dimensions (width / length / height) in mm:  2500 / 2100 / 2550

Test room dimensions (width / length / height) in mm:  1940 / 1940 / 1950

Arc radius (maximum) in mm:  800

Size of the turntable in mm:  300

Swivel tube swivel angle:  +/- 175°

Turntable revolutions:  1-5 rpm